Using the Projector
■ ■ ■ ■
32
Reverse the order shown above to turn off the projector and
other equipment. After you press the Power button to turn
off the projector, the fan will remain on and the operation
indicator will flash orange for about one minute as the
projector cools.
The indicator stops blinking (and remains lit in orange) when
the cooling operation is complete.
♦
Note:
The projector is designed so that it cannot be turned back
on while the power indicator is flashing green. Before pressing
the Power button again, wait until the lamp has cooled and the
operation indicator is orange.
Sleep Mode
Sleep mode conserves electricity by automatically turning off
the lamp after the projector has not been used for 30 minutes.
In sleep mode, the projector’s operation indicator is orange
and only a minimum amount of the projector’s circuitry
remains on. This conserves electricity, cools the projector, and
extends the life of the lamp. When the projector is in sleep
mode, you can press the Power button to start projecting
images, or you can unplug the projector’s power cord.
operation indicator
