A SERVICE OF

logo

i
Replace the lamp cover and tighten the screw to secure it.
a
Make sure the lamp cover is securely installed or the lamp will
not turn on.
Reset the lamp timer to zero to monitor the new lamp's usage.
Related Links
"Projector Lamp Maintenance" p.162
"Replacement Parts" p.187
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear
the lamp replacement message and to monitor lamp usage correctly.
a
Do not reset the lamp timer if you have not replaced the lamp to
avoid inaccurate lamp usage information.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Reset menu and press [Enter].
d
Select Reset Lamp Hours and press [Enter].
Projector Lamp Maintenance
165