Problems Concerning Network Functions
Cannot connect using EasyMP Network Projection
Check the message on the screen and then apply the following countermeasures.
Error Messages Remedy
The application version used is not supported. Install the latest
version of the application on your computer.
Install the current version of EasyMP Network Projection from the EPSON Projector Software for Meeting &
Monitoring CD-ROM supplied with the projector.
When a connection is made using EasyMP Network Projection, the projected image remains as is, and a connection cannot be made
from another computer.
Check Remedy
Did the presenter leave the conference room without cutting off
the network connection?
With EasyMP Network Projection, the connection with the computer that was previously connected can be cut
off when another computer tries to connect with the projector, and it connects with the computer that is trying to
connect.
Therefore, when a Projector keyword is not set for the projector, or if you know the Projector keyword, you can
cut off the current connection and, if you perform a connection operation, you can connect to the projector.
When a Projector keyword is set for the projector, if you do not know the Projector keyword, restart the projector
and reconnect.
The projector is not found when EasyMP Network Projection is started.
Check Remedy
Is the Network Configuration screen from the Configuration
menu displayed on the projector?
When the Network Configuration screen is displayed on the projector, network connection for EasyMP Network
Projection is disabled. Close network settings on the projector, and return to the LAN standby screen.
Are the computer's LAN card and the built-in LAN function
available?
Check that LAN is valid by checking Control Panel - System - Hardware in the device manager and so on.
Was the network adapter used selected correctly with EasyMP
Network Projection?
If the computer has multiple LAN environments, it cannot connect unless the network adapter is selected
correctly. When using a computer running Windows, start EasyMP Network Projection, and select the network
adapter you are using from Set options - Switch LAN.s p.36
Troubleshooting
55
