Power light Lamp Temperature Filter light Status and solution
light light
Flashing red Off Flashing Off Projector is too hot.
orange
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• Make sure the environmental temperature
is not too hot.
• If overheating continues, replace the air
filter.
Red Off Red Off Projector has overheated and turned off.
Leave it turned off to cool down for five
minutes.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If operating the projector at high altitude,
turn on High Altitude Mode.
• If overheating continues, replace the air
filter.
• If the problem persists, unplug the projector
and contact Epson for help.
Red Flashing Off Off Lamp has a problem.
red
• Check to see if the lamp is burned out,
broken, or installed incorrectly. Reseat or
replace the lamp as necessary.
• Make sure that the vents and air filter are
not clogged with dust or obstructed by
nearby objects.
• If operating the projector at high altitude,
turn on High Altitude Mode.
• If the problem persists, unplug the projector
and contact Epson for help.
143
