A SERVICE OF

logo

Note: If dust is difficult to remove or the air filter is damaged, replace the air filter.
6. Place the air filter back in the projector as shown.
7. Close the air filter cover.
Parent topic: Air Filter and Vent Maintenance
Related references
Projector Light Status
Replacing the Air Filter
You need to replace the air filter in the following situations:
After cleaning the air filter, you see a message telling you to clean or replace it
The air filter is torn or damaged
Note: You must install an air filter or the projector will turn off after about one minute.
You can replace the air filter while the projector is mounted to the ceiling, if necessary. The illustrations
below show the projector placed on a table.
1. Turn off the projector and unplug the power cord.
130