A SERVICE OF

logo

Open as PDF
next previous
Before calling your dealer or service center for assistance, check the matters below once again.
1. Make sure you have connected projector to your equipment as described in the section “CONNECTING THE PROJECTOR” on pages
11 13.
2. Check cable connection. Verify that all computer, video and power cords are properly connected.
3. Verify that all power is switched on.
4. If projector still does not produce an image, re-start the computer.
5. If the image sill does not appear, unplug projector from the computer and check the computer monitor’s
display. The problem may be with
your graphics controller rather than with projector. (When you reconnect
projector, remember to turn the computer and monitor off before you
power up projector. Power the equipment back on in order of projector and computer.)
6. If the problem still exists, check the following chart.