Selects area displayed with
this projector. Select the resolution at
the Display area dialog box.
Adjustment of horizontal area displayed with this projector. Press
POINT LEFT/RIGHT button(s) and adjust number to match the resolution of
image.
Adjustment of vertical area displayed with this projector. Press
POINT LEFT/RIGHT button(s) and adjust number to match the
resolution of image.
Adjustment of width of image. Press POINT LEFT/RIGHT button(s)
for adjustments.
Adjustment of height of image. Press POINT LEFT/RIGHT button(s)
for adjustments.
NOTE: Display area (H/V), Horizontal scale and Vertical scale cannot
be adjusted when “HDTV1O35i” or “HDTV1O8Oi” is selected on
SYSTEM Menu (P23, 24).
Fine sync and Total dots cannot be fully adjusted when ‘HDTV1O35i”
or “HDTV1O8Oi”
is selected on SYSTEM Menu (P23, 24).
To store adjustment parameters, move a red frame pointer to
Stored icon and then press SELECT button. Move a red arrow pointer to
any of Mode 1 to 5 that you want to store to and then
press SELECT
button.
I o clear adjustment parameters previously set, move a red
frame pointer to Mode free icon and then SELECT button. Move
a red arrow pointer to the Mode that you want to clear and then
press SELECT button.
Other icons operates as follows.
Reset all adjust parameters on adjustment dialog box to previous
figure.
Closes PC ADJUST MENU
