INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS
STEP 1 : (SEE FIGURE 2)
Open parts bags labelled "A" and "B" and verify that all
parts are present.
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
CAUTION! Muffler is hot! Allow engine to
cool down before proceeding with bumper
installation.
NOTE: Right hand (RH) and left hand (LH) are
determined from the operator's position while seated on
the tractor.
SHOWN FULL SiZE
PARTS BAG "B" EXCEPT WHERE NOTED
J D
(parts bag "A")
(parts bag "A")
E
(parts bag "A")
(parts bag "A") FIGURE 2
REF PART NO. QT_
A 48894 2
B 43062 2
C 43001 2
D 48866 2
E 1643-60 2
F 43003 4
G 43070 4
H 44742 4
DESCRiPTiON
SelfThreadingScrew,3/8-16x 1-1/2"
Hex Bolt, 3/8-16 x 1-1/2"
Hex Bolt, 3/8-16 x 1"
Pivot Spacer
Plastic Grip
Lock Washer, 3/8"
Washer, 3/8"
Plug
STEP 2: (SEE FIGURE 3)
Remove tractor hood. (Refer to tractor manual.) Place
hood on cardboard or on a mat to protect paint.
If you have an (LT) Lawn Tractor with a heat shield
like the one shown, remove the heat shield.
iMPORTANT: Be sure to re-attach the heat shield after
bumper is installed.
Catt 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
(LT) LAWN TRACTOR
......... -----1 MUFFLER HEATSHIELD
)
N
FIGURE 3
5
