05-04-06
CA100
3
6. Hit the bumper or strong metal part of the vehicle to test the threshold level of the sensor.
a). Activate the warn-away (first stage the shock sensor), the siren will emit a short chirp.
b). Activate the full alarm (second stage the shock sensor), the siren will emit a long chirp.
7. When you are satisfied with the
second stage the shock sensor
setting, press and hold
and button
at the same time for 2 seconds. Two long siren chirps to indicate the unit is ready to accept adjustments of
the
first stage the shock sensor
(
warn-away
).
8. Follow the step 4, 5 and 6 to adjust the warn-away sensitivity.
9. When you are satisfied with the setting, press
and buttons at the same time. One long siren chirp to
indicates the unit has locked in the adjustment.
Note: If
30
seconds of inactivity expire, or turn on the ignition during of above steps, the unit will exit the
program mode and return to the disarmed mode. Three long chirps will confirm exit.
OPERATION MANUAL
TRANSMITTER OPERATION:
Transmitter Button System Function Remark
Arm & Lock door
-
Arm & Delete The Shock Sensor Press twice within 3 seconds.
Car Locator Upon Armed.
(3 seconds)
Panic function Press and hold for 3 seconds
Disarm & Unlock Door
-
Disarm &Two Steps Door Unlock Press twice within 3 seconds.
(2 seconds)
Disarm & Pop Trunk Release Press and Hold for 2 seconds
+
(2 seconds)
Activate Car-Jacking Upon Ignition on
LED INDICATORS:
LED Function LED Function
Off Disarmed 2 flashes... pause Trigger on trunk/hood
Slow flash Armed 3 flashes... pause Trigger on door switch
Fast flash Passive arming 4 flashes... pause Trigger on Dual Zone Shock Sensor
On (solid) Valet mode 5 flashes... pause Trigger on Ignition switch
CHIRP INDICATORS: PARKING LIGHT:
Chirp Function Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Ajar Warning 3 flashes Disarm / Intrusion
4 chirps Disarm / Intrusion 12 flashes Car Locator
6 chirps Car Locator
ACTIVE ARMING – LOCK & ARM:
1. Press button on transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle doors will lock upon arming when interfaced with the security system.
Ajar Warning:
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
Silent Arming / Disarming:
Press the and buttons at same time will arm or disarm your security system,
No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking lights only.
Shock Sensor By-Pass:
Press the
button twice within 3 seconds will arm the security system, by-pass the
shock sensor. The system will chirp one additional time to confirm the sensor bypass mode was activated. The
sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to
normal operation during the next arming cycle.
PASSIVE ARMING:
Active arming / disarming is controlling your security system via the remote transmitter. This security system is
equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds after
the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any door /
hood / trunk, the security system LED will stop flashing. It will begin flashing again once the vehicle all
entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1] time
and the parking lights will flash [1] time.
PASSIVE DOOR LOCKING:
