280-8001-01
DXZ748RMP 27
English
Operations Common to Each Mode
Dimmer level
You can adjust the reduced illumination level of
the dimmer.
∗ The factory default setting is “LV3”. (Adjustment
range: LV1 to LV5)
1. Press and hold the [T] button for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [a] or [d] button to select
“
Å
DIMMER LV
Î
”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise to adjust the reduced illumina-
tion level of the dimmer.
● LV1 to LV5:
The dimmer operation is performed depend-
ing on the set level LV1 to LV5.
● OFF:
No dimmer operation is performed.
4. Press the [T] button to return to the previous
mode.
Dimmer in control
You can setting the dimmer in control AUTO or
ILLUMI.
∗ The factory default setting is “AUTO”.
1. Press and hold the [T] button for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [a] or [d] button to select
“
ÅÅ
ÅÅ
Å
DIMMER IN
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “AUTO” or “ILLM”.
4. Press the [T] button to return to the previous
mode.
Selecting the CONTRAST mode
∗ The factory default setting is “8”.
1. Press and hold the button [T] for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [a] or [d] button to select
“
ÅÅ
ÅÅ
Å
CONTRAST
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob to select from 1-
18.
4. Press the [T] button to return to the previous
mode.
Anti-theft indicator
The red Anti-theft indicator is a function for pre-
venting theft. When the DCP is removed from
the unit, this indicator blinks.
∗ The factory default setting is “OFF”.
1.
Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection display.
2. Press the [a] or [d] button and select
“
ÅÅ
ÅÅ
Å
BLINK LED
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob clockwise to set this
function “ON” or turn it counterclockwise to
switch this function “OFF”.
4.
Press the [T] button to return to the previous mode.
Setting RDS interrupt
You can set RDS mode interrupt (TA, PTY) for
the 2-ZONE function.
∗ The factory default setting is “ON”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“
ÅÅ
ÅÅ
Å
RDS-INT2Z
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OFF”.
● ON:
RDS interrupt is effective.
● OFF:
RDS interrupt is ineffective.
Note:
• If Radio mode is selected when TA (Traffic An-
nouncement) and PTY are turned “ON”, the inter-
rupts are received even if RDS Interrupt is turned
“OFF”.
4.
Press the [T] button to return to the previous mode.
Setting the external amplifier
∗ The factory default setting is “OFF”.
1. Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2. Press the [a] or [d] button and select
“
ÅÅ
ÅÅ
Å
AMP-CANCL
ÎÎ
ÎÎ
Î
”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise and select “ON” or “OFF”.
● ON:
Use with connected AMP.
● OFF:
Use with inside AMP.
4.
Press the [T] button to return to the previous mode.
+DXZ748RMP-009-ENG 1/14/04, 11:02 AM27
