A-1
Cisco uBR-3x10 RF Switch Hardware Installation and Cabling Guide
OL-1984-06
APPENDIX
A
Specifications and Component Part Numbers
This appendix provides information on physical and RF specifications for the
Cisco uBR 3x10 RF Switch.
Physical Specifications
The following table lists the physical specifications and power requirements for the
Cisco uBR 3x10 RF Switch.
Table A-1 Physical Specifications
Description Specification
Dimensions (H x W x D) 19 x 15.5 x 5.25 in. (842 x 384 x 132 mm)
Weight 36 lb (16.6 kg)
AC-input voltage rating 100 to 240 VAC (Operating Range: 90 to 254 VAC)
AC-input current rating 0.5 A
AC-input cable 18 AWG three-wire cable, with a three-lead IEC-320 receptacle on the power supply end
and a country-dependent plug on the power source end
AC frequency 50-60 Hz
DC-input voltage rating -48 to -60 VDC (Operating Range: -40.5 to -72 VDC)
DC-input current rating 0.7A
DC-input cable 14 AWG (2.5 mm
2
) minimum recommended
DC voltage supplied +12V
Temperature Operational temperature range:32 to 104°F (0 to +40°C)
Operating temperature range:23 to 151°F (-5 to +55°C)
Software requirement Cisco IOS Release 12.2(8)BC2 or later version of Cisco IOS Release 12.2BC
Regulatory compliance Safety: CSA950/UL1950, EN60950, IEC 60950, ACAN TS001, AS/NZS3260
EMC Emissions: CFR 47 part 15:2000 Class B; EN55022:1998 Class B; EN300386:2000;
AS/NZS 3548:1995 Class B; CISPR22:1997 Class B; VCCI-3/2000.04; ICES-003:1994;
CNS13438:1997 Class B
EMC Immunity: EN61000-3-2:1995; EN61000-3-3:1995; EN55024:1998;
EN50082-1:1992; EN50082-1:1997
