Advanced Configuration
Admin
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 50
5
Configuring Ping
You can use a ping to see if another site on the network can be reached. Ping
sends ICMP echo request packets to another node on the network.
The Admin > Ping window displays the current ping settings.
To configure the ping settings, follow these steps:
STEP 1 Click Admin > Ping.
STEP 2 Configure the Ping Parameters.
• Target IP Addre ss—Enter the IP address of the device you want to ping.
• Count—From the drop-down menu, select the maximum count to the target
IP address for each attempt.
• Time Out—From the drop-down menu, select the time out (in seconds)
interval if the device does not respond.
STEP 3 To test the ping, click Te s t . The test results are displayed in the Ping Results
section.
