A SERVICE OF

logo

Advanced Configuration
QoS
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 40
5
DSCP
- DSCP Settings—DSCP Settings enable mapping DSCP values to
specific priority levels. The default DSCP settings are shown in the
following table:
DSCP Value—Indicates the Differentiated Services Code Point value in the
incoming packet.
Priority—Maps the DSCP value to the selected priority level.
STEP 4 Click Save.
Table 2 DSCP Settings
DSCP Value (0-63) Priority
46 high
34 medium
24 normal
All others low