Configuring Modular Quality of Service Congestion Management on Cisco IOS XR Software
How to Configure QoS Congestion Management on Cisco IOS XR Software
QC-44
Cisco IOS XR Modular Quality of Service Configuration Guide
Step 5
exit
Example:
RP/0/RP0/CPU0:router(config-pmap-c)# exit
Returns the router to policy map configuration mode.
Step 6
exit
Example:
RP/0/RP0/CPU0:router(config-pmap)# exit
Returns the router to global configuration mode.
Step 7
interface type instance
Example:
RP/0/RP1/CPU0:router(config)# interface POS
0/2/0/0
Enters interface configuration mode and configures an
interface.
Step 8
service-policy {input | output} policy-map
Example:
RP/0/RP0/CPU0:router(config-if)# service-policy
output policy1
Attaches a policy map to an input or output interface to be
used as the service policy for that interface.
• The traffic policy evaluates all traffic leaving that
interface.
Step 9
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-if)# end
or
RP/0/RP0/CPU0:router(config-if)# commit
Saves configuration changes.
• When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
–
Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
–
Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
Step 10
show policy-map interface type instance [input
| output]
Example:
RP/0/RP0/CPU0:router# show policy-map interface
POS 0/2/0/0
(Optional) Displays policy configuration information for all
classes configured for all service policies on the specified
interface.
Command or Action Purpose
