Implementing IS-IS on Cisco IOS XR Software
How to Implement IS-IS on Cisco IOS XR Software
RC-105
Cisco IOS XR Routing Configuration Guide
Step 15
end
or
commit
Example:
RP/0/RP0/CPU0:router(config-isis-if)# end
or
RP/0/RP0/CPU0:router(config-isis-if)# commit
Saves configuration changes.
• When you issue the end command, the system prompts
you to commit changes:
Uncommitted changes found, commit them before
exiting(yes/no/cancel)?
[cancel]:
–
Entering yes saves configuration changes to the
running configuration file, exits the configuration
session, and returns the router to EXEC mode.
–
Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
–
Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
Step 16
show isis interface [
type
instance
| level {1 |
2}] [brief]
Example:
RP/0/RP0/CPU0:router# show isis interface
POS0/1/0/1 brief
(Optional) Displays information about the IS-IS interface.
Step 17
show isis [instance
instance-id
] database
[level {1 | 2}] [detail | summary | verbose] [*
|
lsp-id
]
Example:
RP/0/RP0/CPU0:router# show isis database
level 1
(Optional) Displays the IS-IS LSP database.
Step 18
show isis [instance
instance-id
] lsp-log [level
{1 | 2}]
Example:
RP/0/RP0/CPU0:router# show isis lsp-log
(Optional) Displays LSP log information.
Step 19
show isis database-log [level {1 | 2}]
Example:
RP/0/RP0/CPU0:router# show isis database-log
level 1
(Optional) Display IS-IS database log information.
Command or Action Purpose
