10-2
Cisco IE 2000 Switch Software Configuration Guide
OL-25866-01
Chapter 10 Configuring CIP
Monitoring CIP
Enabling CIP
Monitoring CIP
Troubleshooting CIP
Command Purpose
Step 1
configure terminal Enters global configuration mode.
Step 2
cip security {password password
| window timeout value}
Sets CIP security options on the switch.
Step 3
interface vlan 20 Enters interface configuration mode.
Step 4
cip enable Enables CIP on a VLAN.
Step 5
end Returns to privileged EXEC mode.
Step 6
show running-config Verifies your entries.
Step 7
copy running-config
startup-config
(Optional) Saves your entries in the configuration file.
Table 10-1 Commands for Displaying the CIP Configuration
Command Purpose
show cip {connection | faults | file |
miscellaneous | object | security| session |
status}
Displays information about the CIP subsystem.
Table 10-2 Commands for Troubleshooting the CIP Configuration
Command Purpose
debug cip {assembly | connection manager
| errors | event | file | io | packet | request
response | security | session | socket}
Enables debugging of the CIP subsystem.
