2-90
Catalyst 6500 Series Switch Command Reference—Release 8.1
78-15474-01
Chapter 2 Catalyst 6500 Series Switch and ROM Monitor Commands
clear qos ipprec-dscp-map
clear qos ipprec-dscp-map
To reset the mapping set by the set qos ipprec-dscp-map command to the default setting, use the clear
qos ipprec-dscp-map command.
clear qos ipprec-dscp-map
Syntax Description This command has no arguments or keywords.
Defaults The default IP precedence-to-DSCP configuration is listed in Table 2-4.
Command Types Switch command.
Command Modes Privileged.
Examples This example shows how to clear the IP precedence-to-DSCP mapping table:
Console> (enable) clear qos ipprec-dscp-map
QoS ipprec-dscp-map setting restored to default.
Console> (enable)
Related Commands set qos ipprec-dscp-map
show qos maps
Table 2-4 IP Precedence-to-DSCP Default Mapping
IPPREC
01234567
DSCP
0 8 16 24 32 40 48 56
