Cisco Systems 3020 Manual

A SERVICE OF

next previous

7

Follow these steps to install the switch module in the blade server:

Step 1 If you have not already done so, touch the static-protective package that contains the switch

module to an unpainted metal part of the blade server for at least 2 seconds.

Step 2 Remove the switch module from its static-protective package.

Step 3 Remove the interconnect blank from the bay where you plan to install the switch module, if

one is present, and install the switch module. (See Figure 3.)

Figure 3 Removing the Interconnect Module Blank from the Blade Server

1

Lever for the interconnect module blank

153142

1