A SERVICE OF

logo

13
Figure 5 Connecting the Ethernet Cable from a PC to a Switch Module Ethernet Port
Caution Do not connect the switch module to any device other than the PC or workstation being
used to configure it.
Step 7 Connect the other end of the cable to the Ethernet port on the PC or workstation. Verify that
the port status LEDs on both connected Ethernet ports are green.
Step 8 Wait approximately 30 seconds after the port LEDs turn green, and launch a web browser on
your PC or workstation.
23x
24x
21x
24x
17x
18x
17x
20x
17
20
SYST
STAT
DLX
SPD
CONSOLE
UID
WS-CBS-3020-HPQ
MODE
MEDIA DETECT SFP/R-45 PORTS 17-20
17
20
18
19
153144