1-12
Cisco ONS 15310-MA SDH Reference Manual, Release 9.1 and Release 9.2
78-19417-01
Chapter 1 Cisco ONS 15310-MA SDH Shelf Assembly Hardware
Cable Description and Installation
Figure 1-8 32-PAIR/24-GAUGE T1 SHIELDED CABLE ASSEMBLY
Figure 1-9 25-PR 24-GA CORR-SHIELD OUTDOOR CABLE ASSEMBLY
•
Coaxial cables: Coaxial cables connect to the electrical ports using BNC cable connectors. Coaxial
cables carry E3/DS3 traffic to and from the ONS 15310-MA SDH. The ONS 15310-MA SDH
supports up to three transmit and three receive coaxial connectors on each shelf assembly.
Warning
The E1/E3 ports on the ONS 15310-MA SDH are intra-building ports and are suitable only for
connecting to shielded cabling grounded at both ends.
Statement 1084
274042
22-16 GA. x .25 bolt term.
ring, T&B
20 GA. stranded green
PVC hookup wire, alpha
4-40 x 425
captive
P.H.M.S.,
AMP
4-40 x 425
captive
P.H.M.S.,
AMP
64-pin male
connector, AMP
64-pin male bail-lock
connector, AMP
Pin 1
Pin 1
xxx
32-PR 24-GA T1
shielded cable, ADC
Table 1-1 E1 cables for wire-wrap connection
ACS Part Numbers Length Description
PCAM90SPA0PC001 25 feet Connector-Wire Wrap, DSX
PCAM90SPA1OC001 50 feet Connector-Wire Wrap, DSX
PCAM90SPA3MC001 100 feet Connector-Wire Wrap, DSX
PCAM90SPA7IC001 200 feet Connector-Wire Wrap, DSX
274041
1/2" 2:1 Heat shrink, black
Pin 1
xxx
25-PR 24-GA CORR-Shield
outdoor cable, general
50-Pin male
710 splice connector, 3M
50-POS
710 cover, 3M
