Chapter 3 Configuring Devices
Using the Templates
3-6
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
78-14092-01
Role in Network From the list, select one of the following:
• Access Point—Use this setting if the
access point is connected to the wired
LAN.
• Repeater—Use this setting for access
points not connected to the wired LAN.
• Survey Client—Use this setting when
performing a site survey for a repeater
access point. When you select this
setting, clients are not allowed to
associate and the bridge's STP function
is disabled.
• Root Bridge—Use this setting to set a
bridge as the root bridge. (One bridge in
each group of bridges must be set as the
root bridge). The root bridge cannot
associate with another root bridge.
• Non-Root Bridge w/ Client—Use this
setting for non-root bridges that accept
associations from client devices and for
bridges acting as repeaters. A non-root
bridge will only associate to another
bridge (root or non-root).
• Non-Root Bridge w/o Client—Use this
setting for non-root bridges that should
not accept associations from client
devices. A non-root bridge (without
clients) can connect to a wired LAN and
only associates to another bridge (root or
non-root).
Table 3-1 Express Template Settings (continued)
Field Description
