SKU 95640 For technical questions, please call 1-800-444-3353 PAGE 5
9. Never leave the Adapter unattended with a load. Remove the load from the
Adapter before leaving.
10. Do not allow children and other unauthorized people to handle or play with
the Adapter.
12. WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be under
stood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
11. Do not use the Adapter as a permanent stand for a transmission or differ-
ential. Use the Adapter only while making repairs. Then immediately remove
the transmission or differential from the Adapter.
ASSEMBLY INSTRUCTIONS
To Attach The Adapter To The Floor Jack:
1. Remove the Saddle from the Floor Jack (neither included). (See Figure A.)
2. Insert the threaded portion of the Adapter’s Saddle Base (27) into the mounting
hole in the Floor Jack. (See Figure A.)
3. Secure the Adapter to the Floor Jack by firmly tightening the Nut (31) onto the
threaded portion of the Adapter’s Saddle Base (27). Note: The Saddle Base
should not swivel when tightened. (See Figure A.)
REMOVE
SADDLE
FROM
FLOOR JACK
THREADED PORTION OF ADAPTER’S SADDLE BASE (27)
FLOOR
JACK
NUT
(31)
FIGURE A
