50
Photos
Refer to this chapter for details on shooting photos – from capturing
and playing back images to printing them.
Basic Recording
Taking Photos
1 Move the lens cover switch down
to to open the lens cover.
2 Move the / switch to
(memory card).
3 Holding the lock button pressed
down, set the switch to
CAMERA.
4 Press .
• Once the focus is automatically
adjusted, will turn green and
one or more AF frames will appear.
• You can also press on the
wireless controller.
• The CARD access indicator will
flash as the image is being
recorded.
IMPORTANT
Observe the following precautions while
the card access display ( ) appears
on screen, and when the CARD access
indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not open the memory card slot
cover and do not remove the memory
card.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
/ switch or the operating mode.
NOTES
If the subject is not suitable for autofocus,
turns yellow. Adjust the focus manually
( 45).
Basic Recording
Before using a memory card for the
first time, be sure to initialize it with
this camcorder ( 56).
( 23)
Start/Stop
PHOTO
COPY
