1- 58
Specifications
TOP
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Index
Contents
Chapter 2
Using a Variety of
Media
Chapter 1
Basic Procedures
• These specifications are subject to change for improvements.
• The above specifications may vary for different operating environments.
Noise (Operation) Approximately 50 dB (A) or less (less than 6.5 Bels)
Ideal operating environment
15 ~ 30 °C (59 ~ 86 °F), 10 ~ 80 % RH with no condensation
Operating Environment 5 ~ 35 °C (41~ 95 °F), 10~90 % RH with no condensation
Dimensions (w x d x h)
Printer only 1,200 mm x 569 mm x 484 mm (47.3 in x 22.4 in x 19.1 in)
Printer + Stand 1,200 mm x 752 mm x 1,097 mm (47.3 in x 29.6 in x 43.2 in)
Weight (including printhead, ink tanks)
Printer only Approximately 40kg
Printer + Stand Approximately 49kg
*1. The following environment is required to use the High Speed mode of USB 2.0.
• Computer: A computer that supports USB 2.0 High Speed mode.
• OS: Windows Server 2003, Windows XP, or Windows 2000, or MacOS X Ver. 10.3.3 or later.
• USB 2.0 Driver: Microsoft USB 2.0 driver (you can obtain the Microsoft USB 2.0 driver from the Windows Update or
Service Pack).
• USB Cable: A USB cable certified for USB 2.0.
• Canon approved USB 2.0 interfaces (USB drivers confirmed for use with Microsoft operating systems):
• Adaptec USB 2.0 expansion card USB2CONNECT3100
• Adaptec USB 2.0 expansion card USB2CONNECT5100
• Adaptec USB 2.0 expansion card USB2CONNECT2000L
• Intel 845G chip set
• SiS SiS740 chip set
If you have any questions about a chip set listed above, please contact the manufacturer.
*2. One card can be installed, either the network interface board or the IEEE1394 board.
*3. Either Photo Black Ink or Matte Black Ink can be installed.
*4. Use the RIP software application (sold separately) to print on Newsprint for Proofing.
*5. Cannot use the Borderless Size or Oversize items to print on some media types and sizes.
*6. With Oversize selected, load roll media larger than the selected Media Size: roll media 10 mm wider and 10 mm taller,
a cut sheet 10 mm wider and 20 mm taller.
*7. This may differ with some optional boards installed.
*8. The printer consumes a small amount of electrical power, even while it is switched off. Unplug the printer from its pow-
er source to cut off power consumption completely.
W6400
