Customization for Shooting Styles
135
Access the setting screen.
Press the n button, choose [Set Shortcut
button] on the 4 tab, and then press the m
button (p. 45).
Configure the setting.
Press the opqr buttons or turn the 7 dial
to choose a function to assign, and then
press the m button.
Use the assigned function as
needed.
Press the button to activate the assigned
function.
Assigning Functions to the Button
• To restore default settings, choose .
• Icons labeled with indicate that the function is not available in the current
shooting mode or under current function conditions.
• When the or function is used, each press of the button records white
balance data (p. 105), and the white balance settings change to or .
• When the % function is used, each press of the button adjusts and locks
the focus, and % is displayed on the screen.
• Pressing the button when the function is used deactivates screen
display. To restore the display, do any of the following.
- Press any button (other than the ON/OFF button)
- Hold the camera in another orientation
- Open and close the screen
- Raise and lower the flash
