57
ISO Speed/Gain
Adjusting the ISO/Gain Value
1 Press the ISO/GAIN button.
• The current ISO/gain value will be highlighted in orange.
2 Push the joystick up/down to select the desired ISO speed or
gain value and then press the joystick.
• The selected ISO/gain value will be set and the display will return to
normal.
• You can also adjust the ISO/gain value using only the joystick
(A 52).
NOTES
• When high ISO speeds or gain levels are set, the picture may flicker slightly. ISO 12800 / 30 dB gain and higher
values in particular, allow you to shoot video with a higher sensitivity but are more prone to the appearance of noise.
• When high ISO speeds or gain levels are set, bright red, green or blue dots may appear on the screen. In such
case, use a faster shutter speed (A 53) or select a lower ISO speed or gain value.
• When the ISO speed or gain level is changed, some noise may appear momentarily on the screen. Do not
adjust the ISO speed/gain level while recording.
• If you set an assignable button to [ISO/GAIN] (A 85), you can press that button instead of the ISO/GAIN
button to highlight the ISO/gain value.
