CSX400 Configuration with QuickSET
124 CSX400 and CSX400-DC User’s Guide
The following defines the fields in the Compression and Congestion window.
Interface — Displays the available, pre-configured interface numbers.
Compression — Displays the status of data compression for a specific interface. Options for this
field are either on (box shows a check mark) or off.
The following defines the fields for Frame Relay only:
Committed # Burst — Displays the Committed Burst size, which is the maximum amount of
data a user may offer to the network during a calculated time interval. Data is guaranteed not to be
discarded by the network.
Excess # Burst — Displays the Excess Burst size, which is the maximum amount of data by
which a user can exceed the Committed Burst size. This data is not guaranteed to be passed by the
network.
Throughput — Displays the maximum bandwidth of your WAN connection.
To turn data compression on or off for a specific interface, click on the interface number that you
wish to configure in the compression scroll list, then click the compression check box. Clicking the
A
pply Changes button applies the changes to the interface.
Once compression configuration is complete, click on the S
ave button to save any changes you
make, then click on the Ex
it button to exit the Compression and Congestion window.
