-22-
Revision 4/F3591 © Moffat Ltd, August 2004
Bottom screws (x4)
6.2 ACCESS
6.2.1 CONTROL PANEL
1) Undo the screw on the left hand side of
the control panel.
6.2.2 FAN BAFFLE
1) Open the oven doors and remove all racks
and trays from the oven.
2) Remove the four baffle securing screws
from the rear of the oven.
6.2.5 BOTTOM LINTEL
1) Open the oven doors.
2) Remove the screws from the ends of the
bottom lintel (one each end).
3) Remove the two screws from the top of
the lintel, and remove the bottom door
catch (2 screws).
2) The control panel can now hinge open
along its right hand edge.
Figure 6.2.1
3) Withdraw the baffle from the oven.
Figure 6.2.2
6.2.4 RIGHT HAND SIDE PANEL
1) Remove the four screws along the top,
four screws along the bottom, and the four
screws from the rear of the right hand side
panel.
One screw
6.2.3 RIGHT HAND ACCESS PANEL
1) Undo the six screws securing the access
panel to the right hand side panel, and
remove.
Figure 6.2.3
Figure 6.2.4
Top screws (x4)
Rear screws
(x4)
2) Remove the panel.
4) Remove the bottom lintel from the oven.
Figure 6.2.5
Door catch
Screws
