68
N+ Wireless Modem Router
SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
Enabling/Disabling Auto Firmware Update
This innovation provides the Router with the built-in capability to
automatically check for a new version of firmware and alert you that
the new firmware is available. When you log into the Router’s advanced
interface, the Router will perform a check to see if new firmware is
available. If so, you will be notified. You can choose to download the
new version or ignore it.
ECO Mode
Your Router has the ability to automatically turn off the wireless radio to
save power. You may also dim the LED icons if they are too bright.
Click the “Dim icon” check box and then “Apply Changes” to lower the
LED’s brightness.
Click the “Disable radio” check box and set the time range during which
to automatically disable the wireless radio. This range will apply every
day except for those days where the corresponding check box is clicked.
Note that you must go back to the firmware to manually turn on the radio
if desired during these time periods.
