13
N+ Wireless Modem Router
SECTIONSTable of Contents 1 2 4 5 6 7 8 9 103
KNOWING YOUR ROUTER
i. Resetting the Router
Push and release the “Reset” button. The lights on the Router
will momentarily flash. The “Power/Ready” light will begin to
blink. When the “Power/Ready” light becomes solid again, the
reset is complete.
ii. Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds, then
release it. The lights on the Router will momentarily flash. The
“Power/Ready” light will begin to blink. When the “Power/Ready”
light becomes solid again, the restore is complete.
13. Connections to Wired Computers – Yellow
Connect your wired (non-wireless) computers to these ports. These
ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for
standard UTP category 5 or 6 Ethernet cable. The ports are labeled 1
through 4, with onboard LEDs on the connectors.
14. USB Port
Plug in your USB storage device here.
15. Connection to ADSL – Gray
This port is for connection to your ADSL. Connect your ADSL to this
port. An RJ11 telephone cord is provided in the package.
11. Power Jack – Black
Connect the included 12V/1.25A DC power supply to this jack.
12. Reset Button
The “Reset” button is used in rare cases when the Router may
function improperly. Resetting the Router will restore the Router’s
normal operation while maintaining the programmed settings. You can
also restore the factory default settings by using the “Reset” button.
Use the restore option in instances where you may have forgotten your
custom password.
11
12
14
15
13
