39
Double N+ Wireless Router
SECTIONS
Table of Contents
1 2 3 4 5 7 8 9 106
USING THE WEB-BASED ADVANCED USER INTERFACE
Changing the Wireless Channel
There are a number of operating channels from which you can choose.
Your Router is configured to operate on the proper channels for the
country in which you reside. The channel can be changed if needed. If
there are other wireless networks operating in your area, your network
should be set to operate on a channel that is different than the other
wireless networks.
Extension Channel
The IEEE 802.11n specification allows the use of a secondary channel
to double the bandwidth (see “Using the Bandwidth Switch” below).
An appropriate extension channel will be displayed when operating
in 20/40MHz mode (see “Using the Bandwidth Switch” below). The
extension channel can be changed if needed.
Using the Wireless Mode Switch
This switch allows you to set the Router’s wireless modes. There are
several modes.
Note: Some modes may require firmware updates to be enabled.
For 2.4GHz networks
1. Off
This mode will turn OFF the Router’s access point, so no wireless
devices can join the network. Turning off the wireless function of your
Router is a great way to secure your network when you are away from
home for a long period of time, or don’t want to use the wireless feature
of the Router at a certain time.
2. 802.11b&802.11g
Setting the Router to this mode will allow only 802.11b- and g-compliant
devices to join the network
3. 802.11b&802.11g&802.11n
Setting the Router to this mode will allow 802.11b-, 802.11g-, and
802.11n-compliant devices to join the network.
4. 802.11n only
Setting the Router to this mode will allow draft 802.11n-compliant
devices to join the network, keeping out 802.11g and 802.11b devices.
