Class-of-Service Options
Follow the procedures below to assign class-of-service options to this trunk.
Pooled Facility Access
1 At
Action = , enter 4.
Group: Is this trunk in a
2 At
Data = , if the trunk is in a pooled facility access
pooled facility access
group?
group, enter the facility access code (FAC). Enter 0 if the
trunk is not in any group.
The defaults are as follows:
■ 100 for Loop Start trunks
■ 101 for Ground Start trunks
■ 102 for Tie trunks
Dial Access
1 At Action = , enter 5.
2 At
Data = , enter 1 if you want to allow dial access, enter
0 if you do not. The default is 1@.
DGC Group: To assign
Note This item is not administerable for trunk types 1003-
this trunk to a DGC
1008.
group
1 At
Action = , enter 6.
2 At
Data = , enter the DGC group number (l-32, or 0 for
none). The default is 0.
Night Service: To choose
To receive either form of night service, this trunk’s class of
either Directed or Trunk- service must include night service (that is, for Action=3, Data
Answer-from-Any-Station must be between 8 and 15). Also, a NIGHT button must be
(TAAS) Night Service for assigned to the attendant console.
this trunk
■ For Directed Night Service, at least one station must be
assigned to receive night service calls from this trunk (see
Administering Voice Stations).
■ For TAAS Night Service, an external alert must be
assigned for night service use.
(continued)
@ Strongly recommended this value be used
Administering Trunks 5-5
