Administrator Level Options
41-001160-01, Rev 00, Releaes 2.3 3-25
Administrator Options
Outgoing Intercom Settings (9480i, 9480i CT, 55i, 57i, 57i CT)
Type sip intercom type Determines whether the IP phone or the server is
responsible for notifying the recipient that an Intercom
call is being placed. Applicable settings are
Phone-Side, Server-Side, OFF.
For more information on this feature, see “Incoming/
Outgoing Intercom with Auto-Answer and Barge In” on
page 5-98.
Prefix Code sip intercom prefix code The prefix to add to the phone number for server-side
outgoing Intercom calls. This parameter is required for
all server-side Intercom calls.
For more information on this feature, see “Incoming/
Outgoing Intercom with Auto-Answer and Barge In” on
page 5-98.
Line sip intercom line Specifies the line for which the IP phone uses the
configuration from, when making the Intercom call.
The IP phone uses the first available line for physically
making the call but uses the configuration from the line
you set for this parameter.
Note: The "sip intercom type" parameter must be set
with the Server-Side option to enable the "sip
intercom line" parameter.
For more information on this feature, see “Incoming/
Outgoing Intercom with Auto-Answer and Barge In” on
page 5-98.
Parameter in
Aastra Web UI
Parameter in
Configuration Files
Description
