Filter
Top Products
1. With the help of a second person, carefully raise the
Uprights (11) until the treadmill is in the position shown.
11
1
2. Attach a Wheel (37) to each Extension Leg (34) with a
Wheel Bolt (36) and a Wheel Nut (17) as shown.
Tighten the Wheel Bolts only until they are snug; do
not overtighten the Wheel Bolts.
2a
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver , two adjustable wrenches and wire cut-
ters .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
5
Insert one of the Extension Legs (34) into the treadmill
as shown. (Note: It may be helpful to tip the Uprights
[11] in the direction shown by the arrow as you insert
the Extension Leg.) Make sure that the Base Pad (40) is
on the indicated side of the Extension Leg. Attach the
Extension Leg with an Extension Leg Screw (53). Be
sure to push on the head of the Extension Leg
Screw while tightening it.
Attach the other Extension Leg (34) in the same way.
53
11
2b
34
40
17
34
37
36
36
Extension Leg
Screw (53)Ð2
Screw (33)Ð6
Handrail Washer (92)Ð2
Handrail Nut (93)Ð2
Rack Bolt (89)Ð2
Rack Washer
(41)Ð2
Handrail Bolt (91)Ð2
Wheel Nut (17)Ð2
Wheel Bolt (36)Ð2