Filter
Top Products
6
5. Remove the backing from the Adhesive Clip (60).
Press the Adhesive Clip onto the base of the Upright
(1) in the indicated location. Press the Allen Wrench
(61) into the Adhesive Clip.
6. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a
mat under the treadmill.
4. Attach the the Latch Catch (70) to the left side of the
Frame (95) with four Screws (32). Make sure that
the Latch Catch is turned as shown. Note: It may
be necessary to remove the Latch Catch Screws
from the left side of the Frame before beginning this
step.
32
70
95
4
61
60
1
5