Filter
Top Products
6
2. Refer to HOW TO LOWER THE TREADMILL FOR USE
on page 11. Follow step 2 on page 11 to lower the tread-
mill.
Hold a Handrail (45) against the left Upright (46) as
shown. Thread two black Handrail Bolts (42), with two
black Handrail Washers (43) and two Handrail Star
Washers (44), into the left Upright and the left Handrail.
Do not tighten the Handrail Bolts yet.
Have a second person hold the Console Base (52) and
the right Handrail (45) near the right Upright (46) as
shown. Feed the excess Wire Harness (60) into the
upper end of the right Handrail and the Upright.
Attach the right Handrail (45) to the right Upright (46)
with two black Handrail Bolts (42), two black Handrail
Washers (43), and two Handrail Star Washers (44). Do
not tighten the Handrail Bolts yet. Be careful not to
pinch the Wire Harness (60).
3. Attach the Console Base (52) to the Handrails (45) with
four Handrail Screws (11).
Feed the excess Wire Harness (60) into the upper end of
the right Handrail (45).
Tighten all parts used in steps 2 and 3.
4. Attach the Storage Latch (48) to the Upright (46) with
two Screws (2). Be careful not to overtighten the
Screws.
5. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place
a mat under the treadmill.
45
11
11
45
60
3
52
2
46
48
2
44
43
46
52
60
60
45
45
46
43
42
44
42
4