Filter
Top Products
2. With the help of a second person, carefully raise the
Uprights (6) to the position shown. Be careful not to pull
on the Wire Harness (22) as you raise the Uprights.
1. Attach a Base Pad (19) to the bottom of each Extension
Leg (33) with a Base Pad Screw (24) and a Base Pad
Washer (66).
Attach a Wheel (15) to each Extension Leg (33) with a
Wheel Nut (42) and a Wheel Bolt (14).
Attach two Base Pads (19) to the base of the Uprights (6)
with two Base Pad Screws (24) in the locations shown.
5
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included allen wrench and your own phillips screwdriver ,
two adjustable wrenches and 9/16Ó socket wrench .
22
6
2
33
42
15
14
19
24
66
33
24
19
66
14
15
42
1
3. Push the Wire Harness (22) into the right Upright (6) as
you insert the Handrail (16) into the right and left Uprights
(6). Be careful not to pinch the Wire Harness. Tighten
a Handrail Bolt (12) with a Washer (11) into each Upright.
Loosen the two Console Bolts (9) underneath the
Console (1). Rotate the Console to the position shown
and tighten the two Console Bolts.
9
3
1
12
12
16
11
11
22
6
19
24
24
6