Filter
Top Products
5
2. Identify the Left Upright (3), which has the
Upright Wire (46) inside. Orient the Left Upright
as shown, and attach it to the left Upright Base
(
16) with two M10 x 55mm Screws (13), four
M10 Washers (14), and two M10 Nuts (18).
Do
not tighten the Nuts yet.
Attach the Right Upright (9) to the right Upright
Base (16) in the same way. Do not tighten the
Nuts yet.
18
18
14
14
13
14
13
14
16
3
46
16
13
14
9
13
14
2
3. Slide the ends of the Handrail (5) into the tubes
on the Left and Right Uprights (3, 9). If neces-
sary, use a rubber mallet to fully insert the
Handrail. Attach the Handrail with two M6 x
15mm Screws (4).
Connect the Upright Wire (46) to the Handrail
Wire (49).
49
4
4
5
3
9
46
3