Filter
Top Products
7
INCLINE ADJUSTMENT
The incline of the treadmill can be adjusted to any of
three positions. Hold the front of the Frame (29), and
remove the two Pins (4). Raise or lower the Frame,
align the holes in the Frame with one of the sets of
holes in the Uprights (35, 36), and then re-insert the
Pins. Make sure both Pins are fully inserted at the
same height.
FOLDING THE TREADMILL FOR STORAGE
When the treadmill is not in use, it can be folded to
the compact storage position. CAUTION: You must
be able to safely lift 25 pounds (11 kg) to raise,
lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations
shown below. CAUTION: To decrease the possi-
bility of injury, bend your legs and keep your
back straight. As you raise the treadmill, make
sure to lift with your legs rather than your back.
Raise the treadmill to the vertical position.
2. Hold the treadmill
securely with your
left hand as
shown. Insert a
Pin (4) into the
hole in the right
side of the Right
Upright (36) and
into the Frame
(29) as far as it
will go.
LOWERING THE TREADMILL FOR USE
1. Hold the treadmill securely with your left hand as
shown in drawing 2 above. Pull out the Pin (4).
Pivot the treadmill down a few inches and re-insert
the Pin.
2. Hold the treadmill firmly with both hands, and lower
the treadmill to the floor. CAUTION: To decrease
the possibility of injury, bend your legs and
keep your back straight.
29
36
4
CAUTION: Make sure both Pins
(4) are fully inserted at the same height.
4
29
35
36
4
1
2