Filter
Top Products
5
3
3. The Console (16) requires three AA batteries; alkaline
batteries are recommended. Insert three batteries into
the battery compartment. Make sure that the batter-
ies are oriented as shown by the markings inside
the battery compartment.
16
Batteries
5. While another person holds the Handlebar (15) near
the Upright (13), insert the console wire down through
the Upright. Attach the Handlebar to the Upright with
three M8 x 15mm Button Screws (34) and three M8
Split Washers (42). Be careful to avoid pinching the
console wire. Note: The console wire is longer than
shown.
15
34
42
13
42
34
34
5
Console Wire
4. Hold the Console (16) near the Handlebar (15). Insert
the console wire into the indicated hole in the
Handlebar. Note: The console wire is longer than
shown.
Attach the Console (16) to the Handlebar (15) with four
M4 x 16mm Screws (49). Be careful to avoid pinch-
ing the console wire.
16
4
Be careful to
avoid pinching
the console wire.
Be careful
to avoid
pinching the
console
wire.
15
49
49
Hole
Console
Wire