Filter
Top Products
12
HOW TO ADJUST THE RESISTANCE STRAP
If the resistance knob is turned to the highest setting
and there is not enough pedaling resistance, the
resistance strap can be adjusted. To adjust the resis-
tance strap, first remove the left side shield (see HOW
TO ADJUST THE REED SWITCH on page 11).
Next, turn the resistance knob to the lowest setting.
Open the Strap Clamp (26) and pull the end of the
Resistance Strap (18) downward slightly. Close the
Strap Clamp and turn the Flywheel (17) to make sure
that there is not too much resistance.
When the resistance strap is properly adjusted, re-
attach the left side shield and the left pedal arm.
18
17
26