Filter
Top Products
1. With the help of a second person, carefully lay the
treadmill on its right side as shown (refer to the drawing
on page 5 to identify the right side).
Remove the two Extension Leg Screws (34) from the
treadmill. Insert the Extension Legs (41) into the tread-
mill. Make sure that the Extension Legs are turned so the
Base Pads (36) are on the indicated side. Attach each
Extension Leg with an Extension Leg Screw.
With the help of a second person, carefully raise the
treadmill to the upright position so the Extension Legs
(41) are resting flat on the floor.
2. Refer to HOW TO LOWER THE TREADMILL FOR USE
on page 11. Follow the instructions in step 2 to lower the
treadmill.
Attach the Storage Latch (12) to the left Upright (14) with
two Screws (30). Be careful not to overtighten the Screws.
3. Remove the backing from the Adhesive Clip (74). Press
the Adhesive Clip onto the base of the Uprights (14) in
the indicated location. Press the Allen Wrench (73) into
the Adhesive Clip.
4. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place
a mat under the treadmill.
34
34
41
36
14
12
30
41
36
1
2
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.
Assembly requires the included allen wrench and your own phillips screwdriver .
73
74
14
3
6