Filter
Top Products
5
1. Read all instructions at the top of page 4
before beginning assembly.
Refer to figure 1 and identify the left and right
Uprights (34). Attach the Lower Crossbar (1) to
the right Upright with two 3/8Ó x 2Ó Carriage Bolts
(35) and two 3/8Ó Nylon Locknuts (32). Do not
tighten the Nylon Locknuts yet.
Slide the lower end of the Left Brace (2) into the
Right Brace (3).
Attach the Lower Crossbar (1) to the left Upright
(34) with two 3/8Ó x 2Ó Carriage Bolts (35) and two
3/8Ó Nylon Locknuts (32). Do not tighten the
Nylon Locknuts yet.
2. Slide a Leg Cover (22) onto each handle and
down over the top of the Left and Right Legs (4,
5). Wet the ends of the right and left handles with
soapy water. Slide a Handgrip (29) onto each
handle.
Attach the right Pivot Bracket (8) to the right
Upright (34) with a 3/8Ó x 1 1/4Ó Screw (18), a 3/8Ó
Washer (19), and a 3/8Ó Spacer (20) as shown.
Attach the left Pivot Bracket (8) to the left Upright
(34) in the same manner.
3. Attach the Upper Crossbar (36) to the left and
right Uprights (34) with four 3/8Ó x 2Ó Carriage
Bolts (35) and four 3/8Ó Nylon Locknuts (32) as
shown.
Tighten a #8 x 3/4Ó Screw (28) into the Right
Brace (3).
Tighten all parts used in steps 1 to 3.
19
18
32
34
34
32
35
35
36
8
8
5
4
20
22
22
34
34
29
Handles
Fig. 1
Fig. 2
Fig. 3
32
1
28
35
34
LEFT
RIGHT
3
35
34
32
2
3