Filter
Top Products
8. Whilea secondpersonholdstheConsole(16)near
theUpright(13),connecttheconsolewiretothe
ExtensionWire(52).Then,insertthewiresdown-
wardintotheUpright.
AttachtheConsole(16)to theUpright(13)withfour
M6x 15mmButtonScrews(46).Becarefulto
avoidpinchingthewires.
9. IdentifytheLeftPedal(24),whichis markedwitha
"Left"sticker.Usinganadjustablewrench,firmly
tightentheLeftPedalcounterclockwise into the left
arm of the Crank (21). Tighten the Right Pedal (not
shown) clockwise into the right arm of the Crank.
Important: Tighten both Pedals as firmly as pos-
sible. After using the exercise cycle for one
week, retighten the Pedals. For best performance,
keep the Pedals tightened.
Adjust a Pedal Strap (53) to the desired position,
and press the end of the Pedal Strap onto the tab on
the side of the Left Pedal (24). Adjust the other
Pedal Strap (not shown) in the same way.
16
52
46
Console
Wire
Be careful to
avoid pinching
the wires.
24
21
/
10.Make sure that all parts are properly tightened before you use the exercise cycle, Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise cycle to protect the floor.
7