Filter
Top Products
17
ADJUSTING AND REMOVING THE LEG PRESS
PLATE AND ADJUSTMENT TUBE
To adjust the position of the Leg Press Plate (78),
remove the ÒLÓ-Pin (40) from the Press Adjustment
Tube (79) and the Rocker Arm (32). Align a different
set of holes in the Press Adjustment Tube with the set
of holes in the Rocker Arm. Re-insert the ÒLÓ-Pin.
For some exercises, the Press Adjustment Tube (79)
must be removed. Remove the ÒLÓ-Pin (40). Lift the
Press Adjustment Tube off the bracket on the Rocker
Arm (32).
LOCKING THE LEG LEVER
When the low pulley station is in use, the Leg Lever
(29) must be locked in place. Insert the ÒLÓ-Pin (40)
through the hole in the Leg Lever and the hole in the
Rocker Arm (32).
32
79
40
78
40
29
32
PRESS BUTTERFLY LEG HIGH LOW LEG
WEIGHT ARM ARM LEVER PULLEY PULLEY PRESS
PLATES (lbs.) (lbs.) (lbs.) (lbs.) (lbs.) (lbs.)
Top 13 9 27 14 32 30
136 2352 305265
257 3281 449397
3 73 46 115 58 121 130
4 99 58 142 69 144 170
5 118 74 171 88 178 215
6 132 88 201 101 217 247
7 151 112 217 114 230 319
8 165 131 264 131 262 347
This chart shows the approximate weight resistance at each station. ÒTopÓ refers to the 6.5 lb. top weight. The
other numbers refer to the 12.5 lb. weight plates. Weight resistance shown for the butterfly arm station is for
each butterfly arm.
The actual resistance at each weight station may vary due to differences in individual weight plates, as well as
friction between the cables, pulleys, and weight guides.
Weight Resistance Chart