8
7. Press a Weight Tube Bumper (64) into the end of a
Weight Tube (63). Insert the Weight Tube into the
front stack of Weights (25). Be sure that the pin
on the Weight Tube is sitting in the pin grooves
in the top Weight.
Lubricate the inside of the holes in the Top Weight
(65). Set the Top Weight onto the front stack of
Weights (25). Insert both Long Weight Guides (62)
into the stack of Weights. Be sure that the holes
in the Weight Guides are at the top, as shown.
8. Press a Weight Tube Bumper (64) into the end of
the other Weight Tube (63). Insert the Weight Tube
into the rear stack of Weights (25). Be sure that
the pin on the Weight Tube is sitting in the pin
grooves in the top Weight.
Lubricate the inside of the holes in the other Top
Weight (65). Set the Top Weight onto the rear stack
of Weights (25). Insert both Short Weight Guides
(73) into the stack of Weights. Be sure that the
holes in the Weight Guides are at the top, as
shown.
7
Holes
Lubricate
62
65
Pin
63
64
Pin Grooves
Holes
Lubricate
73
65
Pin
63
64
Pin Grooves
25
25
8