Filter
Top Products
8
5. Attach the Foot Frame (8) to the Adjustment
Frame (7) with three M8 x 15mm Buttons
Screws (47).
6. Slide the two Large Foam Pads (32) onto the
Ankle Lock (9).
Next, pull the Long Adjustment Knob (20),
insert the Ankle Lock (9) into the Adjustment
Frame (7), and then release the Long
Adjustment Knob. Make sure that the Long
Adjustment Knob is engaged in the indicat-
ed adjustment hole in the Ankle Lock.
Insert an M6 x 37mm Bolt (65) into the
Adjustment Frame (7) and into the loop on
the end of the Spring (41). Tighten an M6
Locknut (55) onto the Bolt.
7. Insert the Pad Tube (17) into the welded tube
on the Adjustment Frame (7). Next, tighten an
M4 x 15mm Screw (61) into each side of the
Pad Tube. Then, slide two Small Foam Pads
(33) onto the Pad Tube.
5
7
47
47
8
6
7
55
65
9
41
Hole
32
32
20
7
7
33
33
17
61