Filter
Top Products
6
1.
Open the Front and Rear Legs (1, 2, 3), and
push down on the Link Bars (10, 11, 12) so
that they are straight across as shown.
1
Before beginning assembly, make sure
that you understand the information in
the box above.
3
3
12
10
2
1
Before beginning assembly, carefully read the
following information and instructions:
• To hire an authorized service technician to
assemble the inversion system in your home, call
1-800-445-2480.
• Assembly requires two persons.
• Because of its weight and size, the inversion sys-
tem should be assembled in the location where it
will be used. Make sure that there is enough
clearance to walk around the inversion system as
you assemble it.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
•
For help identifying small parts, see the PART
IDENTIFICATION CHART on page 5.
• As you assemble the inversion system, make sure
that all parts are oriented as shown in the draw-
ings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Assembly requires the following tools:
the included hex key(s)
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Assembly Easier
This manual is designed to ensure that the
inversion system can be assembled successfully
b
y almost anyone. Most people find that if they
set aside plenty of time, assembly goes smoothly.
ASSEMBLY
12
11