Filter
Top Products
7
3
28
5
30
31
3
4
2. Attach one end of the Crossbar (2) to two Joint
Plates (11, 35) with two M10 x 66mm Bolts (28)
a
nd two M10 Nylon Locknuts (31). D
o not tight-
en the Nylon Locknuts yet.
Attach the other end of the Crossbar (2) in the
same way.
3. Attach the Front Leg (4) to the Bench Frame (3)
with an M10 x 19mm Screw (5), an M10 x 66mm
Bolt (28), an M10 Washer (30), and an M10
Nylon Locknut (31). Do not tighten the Nylon
Locknut or Screw yet.
2
28
35
11
2
31
4. Attach the Bench Frame (3) to the Crossbar (2)
with two M10 x 68mm Bolts (27) and two M10
Nylon Locknuts (31).
Do not tighten the Nylon
Locknuts yet.
3
2
31
27
4