Filter
Top Products
6
3
28
5
30
31
3
4
2. Orient the Crossbar (2) so that the warning decal
is in the indicated location. Attach the Crossbar to
a
n Upright (1) with two M10 x 66mm Bolts (28),
two Joint Plates (11), and two M10 Nylon
L
ocknuts (31). D
o not tighten the Locknuts yet.
Repeat this step with the other Upright (1).
3. Attach the Front Leg (4) to the Bench Frame (3)
with an M10 x 66mm Bolt (28), an M10 x 19mm
Screw (5), an M10 Washers (30), and an M10
Nylon Locknut (31). Do not tighten the Locknut
or Screw yet.
2
28
11
11
2
Warning
Decal
1
31
1
4. Attach the Bench Frame (3) to the Crossbar (2)
with two M10 x 68mm Bolts (27) and two M10
Nylon Locknuts (31).
3
2
31
27
4